Click image to view full size image
1Ch HD-SDI over fiber converter for TV live broadcast,supporting 1080P@30fps SDI video,85mmx76mmX30mm
Overview:
The HL-1V-20T/R/HD-SDI is a mini type HD-SDI Optical Fiber Transmitter and Receiver Set.It could transmit HD/SD-SDI as per SMPTE 292M and 259M, with or without embedded data, as well as DVB-ASI over one single mode or multimode fiber. Signals are equalized and re-clocked prior to fiber optic transmission.And HD-SDI Unidirectional Fiber Optic Transmitter should be worked with HD-SDI Unidirectional Fiber Optic Receiver.
Feature:
Video Channel: 1-ch Unidirectional HD-SDI
Transmission Distance: 20km
Fiber Type: Single-mode Simplex
CRAFT: Uncompressed technologyVIDEO
SPEC: 1080P 30 HzRange from 19.4Mb/s to 1.485Gb/s
SMPTE 292M (1.485Gb/s) clock recoverySupport all SMPTE 295M standard, 143Mb/s - 360Mb/s
Specification:
| Item | Typical value |
| Video Interface | |
| Connector | BNC |
| Bit rate | 1.485Gb/s and 270Mb/s auto adaptive |
| Impedance | 75Ω |
| Return loss | >15dB |
| Output level | 800mVp-p±10% |
| Rise and fall time(HD-SDI) | ≤270ps |
| Rise and fall time(SD-SDI) | ≤1.50ns |
| SD-SDI Alignment jitter (1KHz) | ≤0.2UI |
| SD-SDI Timing jitter (10Hz) | <0.2UI |
| HD-SDI Alignment jitter (100KHz) | ≤0.2UI |
| HD-SDI Timing jitter (10Hz) | <1.0UI |
| Standard | Comply to SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard |
| Power and Consumption for desktop equipment | |
| Power supply | DC 12V |
| DC input voltage range | 8V~14V |
| Power consumption | 3W±10 |
| Environment Requirements | |
| Working temperature | -3060 |
| Relative Humidity | ≤95, no condensation |
| Storage temperature | -4085 |
| Equipment dimension | |
| Desktop equipment dimension | 85mm x 76mm x 30mm |
Application:
1.485G SFP Fiber optic video transmission hd sdi receiver , Full high definition Fiber Optical Trans
